BTN800-1000LC/LE Series
Two stage Progressive / Modulating / Electronic Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinge joint, open at both side, easy for maintenance.
★ Sliding/modulating Minimum and maximum air flow regulation for first and second stage by means of electric servomotor with pause closure of gate to prevent any heat dispersion to flue.
★ Electronic with two servo motor control the proportion of fuel and air regulation.
★ Pauses burner, air door closed in order to reduce heat loss in the furnace.
★ The servo motor which fixed with a cam can adjust the consumption for fuel and air.
★ It adapts one flange and heat-resistance insulated pad to connect with boiler.
★ High temperature resistant stainless steel burner diffuse.
★ Independent three-phase motor driven oil pump.
★ Photocell detects the flame.
★ Electrical plant protection rating IP40.
BTN350-650LC/LE Series
Two Stag Progressive / Modulating / Electronic Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinge joint, open at both sides, easy for maintenance.
★ Sliding/modulating Minimum and maximum air flow regulation for first and second stage by means of electric servomotor with pause closure of gate to prevent any heat dispersion to flue.
★ Electronic with two servo motor control the proportion of fuel and air regulation。
★ Pauses burner, air door closed in order to reduce heat loss in the furnace.
★ The servo motor which fixed with a cam can adjust the consumption for fuel and air.
★ It adapts one flange and heat-resistance insulated pad to connect with boiler.
★ High temperature resistant stainless-steel burner diffuses.
★ Independent three-phase motor driven oil pump.
★ Photocell detects the flame.
★ Electrical plant protection rating IP40.
BTN210-250LR/LC/LE Series
Two stage Progressive / Modulating / Electronic Light Oil Burner
★ Mechanical pressure atomization.
★ By adjusting the combustion air and combustion head, the best combustion parameters can be obtained.
★ Hinge joint ,open at both side ,easy for maintenance.
★ Two-stage hydraulic regulator is used for the first and second stage air flow regulation.
★ Progressive/proportional servo motor is used for the first and second stage air flow regulation.
★ The electronic ratio adjustment uses two servo motors to control the proportional adjustment of fuel and air respectively.
★ When the burner is suspended, the damper is closed to reduce the heat loss in the furnace.
★ Servo motor with CAM can adjust the supply of air and fuel at the same time.
★ A flange and high temperature insulation pad are used to connect and fix the boiler.
★ High temperature resistant stainless steel burner diffuse.
★ Independent three-phase motor drives the oil pump.
★ Photocell detects the flame.
★ Electrical plant protection rating IP40.
BTN85-150LR Series
Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinged connection, autonatie open comtrol, maintenance is convenient.
★ Use hydraulic regulator to adjust the first and second stage air flow.
★ A flange and high temperature insulation pad are used to connect and fix the boiler.
★ Combustion air inlet with flow regulating device.
★ The air inlet of the burner is designed with noise reduction.
★ High temperature resistant stainless steel burner flame tray.
★ Three-phase motor drives fan and oil pump.
★ Photoresistor detects flame.
★ Electrical plant protection rating IP40.
BTN40-55L/LR Series
Single/Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinged connection, autonatie open comtrol, maintenance is convenient.
★ Single-stage Manual flow adjustment.
★ Two-stage air flow regulation for first and second stage by means of hydraulic regulator.
★ It adapts one flange and heat-resistance insulatedpad to connect with boiler.
★ Combustion air intake with air flow adjustment device.
★ Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
★ Monophase electric motor to run fan and pump.
★ Flame presence check by photo resistance.
★ Electrical plant protection rating IP40.
★ Plastic protection cover.
BT18-35L/LR Series
Single/Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ No need to remove the burner from the boiler, you can directly remove the atomization device, easy maintenance.
★ Single-stage manual air flow regulation lt is adjusted air flow manually at 1st fire.
★ Two-stage fire hydraulic regulator for the first and second stage fire air flow regulation.
★ A flange and an insulating sealing ring are used to link and fix the boiler.
★ Combustion air inlet with flow regulating device.
★ Sliding flanges paired with various boiler flanges can adjust the position of the burner into the boiler.
★ Adjustable combustion head with steel blast tube and flame disc
★ Single-phase motor drives fan and oil pump.
★ Photoresistor detects flame.
★ Electrical plant protection rating IP40.
BTN15-30L/LR Series
Single/Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinged connection, autonatie open comtrol, maintenance is convenient.
★ Single-stage Manual flow adjustment.
★ Two-stage air flow regulation for first and second stage by means of hydraulic regulator.
★ It adapts one flange and heat-resistance insulatedpad to connect with boiler.
★ Combustion air intake with air flow adjustment device.
★ Adjustable blast-pipe with stainless steel nozzle and deflector disk in steel.
★ Monophase electric motor to run fan and pump.
★ Flame presence check by photo resistance.
★ Electrical plant protection rating IP40.
★ Plastic protection cover.
BTN5-12L/LR Series
Single/Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinged connection, autonatie open comtrol,maintenance is convenient.
★ Single-stage Manual flow adjustment.
★ Two-stage air flow regulation for first and second stage by means of hydraulic regulator.
★ It adapts one flange and heat-resistance insulatedpad to connect with boiler.
★ Combustion air intake with air flow adjustment device.
★ Adjustable blast-pipe with stainless steel nozzle anddeflector disk in steel.
★ Monophase electric motor to run fan and pump.
★ Flame presence check by photoresistance.
★ Electrical plant protection rating IP40.
★ Plastic protection cover.
BTN3L/LR Series
Single/Two stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinged connection,autonatie open comtrol,maintenance is convenient.
★ Single-stage Manual flow adjustment.
★ Two-stage air flow regulation for first and second stage by means of hydraulic regulator.
★ It adapts one flange and heat-resistance insulatedpad to connect with boiler.
★ Combustion air intake with air flow adjustment device.
★ Adjustable blast-pipe with stainless steel nozzle anddeflector disk in steel.
★ Monophase electric motor to run fan and pump.
★ Flame presence check by photoresistance.
★ Electrical plant protection rating IP40.
★ Plastic protection cover.
BT14L/LR/LW/LRW Series
Single/Two Stage Light Oil Burner
★ High pressure mechanical atomisation of fuel using nozzle.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ No need to remove the burner from the boiler, you can directly remove the atomization device, easy maintenance.
★ Single-stage manual air flow regulation lt is adjusted air flow manually at 1st fire.
★ Two-stage fire hydraulic regulator for the first and second stage fire air flow regulation.
★ A flange and an insulating sealing ring are used to link and fix the boiler.
★ Combustion air inlet with flow regulating device.
★ Sliding flanges paired with various boiler flanges can adjust the position of the burner into the boiler.
★ Adjustable combustion head with steel blast tube and flame disc
★ Single-phase motor drives fan and oil pump.
★ Photoresistor detects flame.
★ Electrical plant protection rating IP40.
BTN1200-1800HC/HAE Series
Two stage Sliding / Modulating Heavy Oil Burner
★ Air atomization.
★ By adjusting the combustion air and combustion head, the best combustion parameters can be obtained.
★ Hinge joint, open at both sides, easy for maintenance.
★ Progressive/proportional servo motor is used for the first and second stage air flow regulation.
★ The electronic proportional type uses two servo motors to control the proportional regulation of fuel and air respectively.
★ When the burner is suspended, the damper is closed to reduce the heat loss in the furnace.
★ Servo motor with CAM can regulate the supply of air and fuel at the same time.
★ A flange and high temperature insulation pad are used to connect and fix the boiler.
★ The burner air inlet is designed with noise reduction.
★ High temperature resistant stainless steel burner flame tray.
★ Independent heavy oil electric heater group and three-phase motor drive oil pump.
★ Light resistance detects flame.
★ Electrical plant protection rating Ip40.
BT30-60HAE Series
Electronic Heavy Oil Burner
★ Air or steam atomization.
★ Ability to obtain optimal combustion values by regulating combustion air and blast-pipe.
★ Hinge joint, open at both sides.
★ Maintenance facilitated by the fact that the atomisation unit can be removed without having to remove the burner from the boiler.
★ The burner is paused, close the throttle to reduce the loss of furnace heat.
★ The electronic modulation type uses two servo motors to control the proportional regulation of fuel and air respectively.
★ It is equipped with regulator and stop valve.
★ With the fuel pre-heater which installed with thermometer and adjustable temperature controller.
★ One flange and one insulating seal for boiler fastening.
★ Combustion air intake with air flow adjustment device.
★ Adiustable burner head with steel gaspipe abd diffuser.
★ Three-phase electric motor to run fan.
★ Photocell detects the flame.
★ Electrical plant protection rating IP40.