|
Leave Your Message

SIEMENS-LME... Series Burner Controls

Gas Burner Controls

★ Brand: SEIMENS.

★ Origin Country: Germany.

★ LME are used for the startup and supervision of 1- or 2-stage gas burners or gas burners in intermittent operation.

★ Flame supervision takes place via an ionization probe or a QRA flame detector with AGQ3.xA27 ancillary unit for forced draft gas burners, orin the case of blue-burning flames, with a QRC blue-flame detector.

★Undervoltage detection.

★ Air pressure supervision with functional check of the air pressure switch during startup and operation.

★ Electrical remote reset facility.

★ Multicolor indication of fault status and operational status messages.

★ Limitation of the number of repetitions.

★ Accurate control sequence thanks to digital signal handling.

★ Controlled intermittent operation after a maximum 24 hours of continuous operation.

    SIEMENS-LME... Series Burner Controls
    Type Article No. Mains voltage Mains frequency Power consumption External primary fuse (Si) Weight
    LME11.330C2 251 20 009 AC 120 V +10%/-15%
    AC 230 V +10%/-15%
    50...60 Hz ±6% 12 VA Max. 10 A (slow) Approx. 160 g
    LME22.232C2 251 20 010

    How long is the warranty period?

    Chinese spare parts, one year warrant. Original spare parts, like Siemens, Dungs, Danfoss, Lamtec, Suntec, NO WARRANT.

    Are the parts imported or domestic?

    We use original spare parts in our burner. Such as Dungs pressure switch, SIEMENS controller, Danfoss nozzle, Suntec pump.

    How do you ensure the quality of the spare parts you provide?

    We have quality inspectors for each spare parts and make sure all accessories work excellent.

    Do you test the accessories?

    We have special equipment for accessory test, like photocell, impeller.

    Do you offer any discounts or preferential prices for bulk purchases or large - volume orders?

    If your need is big quantity, we will offer you big discount.